Study on the design, fabrication and drag reduction of ridge-type riblet surfaces based on the thin film buckling method
Guocai Yu, FanQiang Meng, Han Xiao, Jinzheng Duan, A‐Man Zhang, Li-Jia Feng
Harbin Engineering University
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Micro-riblet drag-reduction technology has been developed and applied in aerospace and marine industries to save fuel and cut costs. However, the cost-effective, straightforward and rapid fabrication of riblet surfaces remains a significant challenge. In this paper, drag-reduction surfaces are fabricated using ultraviolet (UV)-induced bending of pre-stretched polydimethylsiloxane. This study examines how substrate pre-stretching ( γ ) and UV exposure duration affect the ridge-riblet geometry and formation mechanisms. Furthermore, regular ridge-type riblets were fabricated, and both experimental and numerical investigations of drag reduction were conducted. The experimental data show that the ridge riblets achieve a drag-reduction rate of 6.10 % at a flow velocity of 2.5 m s −1 ( s Superscript plus Baseline almost equals 16 s + ≈ 16 $s^{+}\approx 16$ ). Our fabrication process demonstrates distinct advantages over existing drag-reduction structures while achieving comparable levels of drag reduction. We simulate the evolution of velocity, shear stress and vorticity distributions across both smooth and riblet surfaces, thereby elucidating the fundamental mechanisms underlying drag reduction. This research provides an effective method for riblet drag-reduction structure.
逐年被引趋势
暂无年度引用数据
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Fluid Dynamics and Turbulent Flows
Rheology and Fluid Dynamics Studies · Fluid Dynamics and Vibration Analysis