Enhanced Photocatalytic Water Decontamination by Micro–Nano Bubbles: Measurements and Mechanisms

Despite recent advancements in photocatalysis enabled by materials science innovations, the application of photocatalysts in water treatment is still hampered due to low overall efficiency. Herein, we present a TiO 2 photocatalytic process with significantly enhanced efficiency by the introduction of micro–nano bubbles (MNBs). Notably, the removal rate of a model organic contaminant (methylene blue, MB) in an air MNB-assisted photocatalytic degradation (PCD) process was 41–141% higher than that obtained in conventional macrobubble (MaB)-assisted PCD under identical conditions. Experimental observations and supporting mechanistic modeling suggest that the enhanced photocatalytic degradation is attributed to the combined effects of increased dissolution of oxygen, improved colloidal stability and dispersion of the TiO 2 nanocatalysts, and interfacial photoelectric effects of TiO 2 /MNB suspensions. The maximum dissolved oxygen (DO) concentration of the MNB suspension (i.e., 11.7 mg/L) was 32% higher than that of an MaB-aerated aqueous solution (i.e., 8.8 mg/L), thus accelerating the hole oxidation of H 2 O on TiO 2 . We further confirmed that the MNBs induced unique light-scattering effects, consequently increasing the optical path length in the TiO 2 /MNB suspension by 7.6%. A force balance model confirmed that a three-phase contact was formed on the surface of the bubble–TiO 2 complex, which promoted high complex stability and PCD performance. Overall, this study demonstrates the enhanced photocatalytic water decontamination by MNBs and provides the underlying mechanisms for the process.