Influence of Ag and Zn on the Microstructure and Properties of Sn-40 Bi Alloy for Improved Soldering Applications
Yu-An Shen
Feng Chia University
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
High Resolution Image Download MS PowerPoint Slide In this study, the effect of adding 2 wt % of Ag and Zn on the microstructural characteristics and properties of Sn–40 Bi alloy (SB40), focusing on mechanical, thermal, and soldering behaviors, was investigated. Microstructural analyses revealed Sn- and Bi-rich phases in SB40, SBA402, and SBZ402. Notably, SBZ402 exhibited a needle-like Zn-rich phase, while SBA402 contained a small amount of Ag 3 Sn. SBA402 exhibited the highest tensile strength of 78.1 MPa, which can be attributed to its finer microstructure and solid solution strengthening. Ag and Zn additives can lower the liquidus onset temperature of SB40, thereby influencing its soldering characteristics. Interfacial reactions showed that SBA402/Cu had a uniform and very thin interlayer of Cu 6 Sn 5 (Ag) ideal for soldering, in contrast to the interfacial voids in SBZ402/Cu. Phase diagram calculations elucidated the microstructural and thermal properties and the formation of interfacial intermetallic compound (IMC). These findings suggest that SBA402 can be favorably used in soldering applications.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Electronic Packaging and Soldering Technologies
Metallurgical and Alloy Processes · Advanced Welding Techniques Analysis