Hydrogen Generation in Neutral Electrolyte of a Hybrid Bipolar Membrane Combining Ionic-Liquid Copolymer (PVAc- co -PVBIT) and Sulfonated Polybenzimidazole
Mónica Stephen Correa-Durán, Armando de Jesús Hernández-Palomo, Jesús Ortiz-Espinoza, María Isabel Loría‐Bastarrachea, Enrique Escobedo-Hernández, José Martín Baas-López, Luis Carlos Ordoñez, Larissa Alexandrova 等 10 位
Centro de Investigación Científica de Yucatán, A.C Universidad Nacional Autónoma de México
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Hybrid bipolar membranes (BPMs) combining sulfonated polybenzimidazole (SPBI-6F) and an imidazolium-containing ionic-liquid copolymer (PVAc-co-PVBIT) were fabricated and evaluated for hydrogen generation under neutral water electrolysis conditions. The SPBI-6F layer provides high chemical and thermal stability with controlled proton transport, while PVAc-co-PVBIT enables anion conduction through flexible imidazolium-rich domains. The SPBI-6F/PVAc-co-PVBIT BPM was assembled by heat pressing and integrated into a membrane–electrode assembly operated in 0.5 M Na2SO4 at 28 °C. Electrochemical impedance spectroscopy (EIS) fitted with R1 + (Q1∥R2) + (Q2∥R3) yielded R1 ≈ 4.4 Ω and two polarization-associated resistances (R2 ≈ 508 Ω; R3 ≈ 580 Ω), indicating that cell losses are dominated by interfacial processes rather than bulk ohmic resistance. Chronoamperometry (3.5 V) and chronopotentiometry (3–15 mA cm–2) showed stable current and voltage profiles with negligible drift, consistent with robust interlayer adhesion under sustained operation. Cross-sectional FE-SEM micrographs before and after electrolysis showed a continuous CEM/AEM interface without evidence of progressive interfacial separation, while both layers withstood 72 h of differential exposure to 1 M KOH and 1 M H2SO4 without visible dissolution or fragmentation. Linear sweep voltammetry showed well-defined activation and ohmic regimes, with an onset voltage estimated by the tangent-intersection method of Vonset,tan = 1.52 V and an apparent current rise around 1.8–2.0 V. At a current density of 8 mA cm–2, the BPM delivered a hydrogen production rate of 2.49 µmol min–1 cm–2 with 52% Faradaic efficiency. These results demonstrate that combining sulfonated and imidazolium-functionalized polymers enables stable hydrogen-generating BPM electrolysis under near-neutral electrolyte conditions without a catalyst at the bipolar junction.
逐年被引趋势
暂无年度引用数据
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Fuel Cells and Related Materials
Membrane-based Ion Separation Techniques · Advanced Battery Materials and Technologies