Strain-Enhanced Electromagnetic Interference Shielding Enabled by Rigid–Flexible Bridging Networks in Coaxial Fibers
Fuping Xue, Chaobo Liang, Jiamin Qi, Xiaolong Zhao, Yaqing Liu, Junwei Gu
North University of China Northwestern Polytechnical University
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Electrically conductive and highly elastic fibers serve as essential building blocks for smart fabrics and wearable electronics. Nevertheless, conventional conductive fibers tend to exhibit pronounced strain sensitivity, which results in substantial degradation of their electromagnetic interference (EMI) shielding performance under deformation. Here, a coaxial wet-spinning technique was employed to fabricate an ST@MPLM fiber. The fiber featured a silica (SiO2)/thermoplastic polyurethane (TPU) sheath (ST) and an MXene-permeating-liquid metal (MPLM) core, containing a rigid-flexible bridging dynamic conductive network. The resulting fiber exhibited large-strain tolerance, achieving a maximum strain of 632.8%. The corresponding fabric retained 102.4% of its EMI shielding effectiveness (SE) at 200% strain, demonstrating strain-enhanced EMI shielding behavior. The hydrogen bonds between TPU and LM, together with the Ti-O → Ga3+ coordination bonds at the MXene-LM droplet interfaces, facilitate the dynamic reconstruction and bridging of the conductive network during stretching. Furthermore, the fabric integrated Joule heating, infrared stealth, and dynamic visual camouflage capabilities, highlighting its potential in smart wearables and multispectral protection.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
材料 / 化学Electromagnetic wave absorption materials
Advanced Sensor and Energy Harvesting Materials · Nanomaterials and Printing Technologies
参考文献 53
此处列出前 3 条
引用本文 2
按被引量排序,此处列出前 3 条