Monolithic Micro Light-Emitting Diode/Metal Oxide Nanowire Gas Sensor with Microwatt-Level Power Consumption
Incheol Cho, Young Chul Sim, Minkyu Cho, Yong‐Hoon Cho, Inkyu Park
Korea Advanced Institute of Science and Technology
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
High-performance, monolithic photoactivated gas sensors based on the integration of gas-sensitive semiconductor metal oxide nanowires on micro light-emitting diodes (μLEDs) are introduced. The μLEDs showed improved irradiance and energy conversion efficiency (i.e., external quantum efficiency, EQE), as the size of LEDs was reduced from 200 × 200 μm 2 (irradiance of 46.5 W/cm 2 and EQE of 4%) to 30 × 30 μm 2 (irradiance of 822.4 W/cm 2 and EQE of 9%). Gas-sensitive zinc oxide (ZnO) nanowires were directly synthesized on top of the μLED through a hydrothermal reaction. The direct contact between the sensing component and μLED sensor platform leads to high light coupling efficiency, minimizing power consumption of the sensor. Furthermore, the sensing performance (i.e., sensitivity) at optimal operating power was improved as the LED size was reduced. The smallest fabricated gas sensor (active area = 30 × 30 μm 2 ) showed excellent NO 2 sensitivity (Δ R / R 0 = 605% to 1 ppm NO 2 ) at the optimal operating power (∼184 μW). In addition, the sensor showed a low limit of detection (∼14.9 ppb) and robustness to high humidity conditions, which demonstrate its potential for practical applications in mobile internet of things (IoT) devices.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Gas Sensing Nanomaterials and Sensors
Nanowire Synthesis and Applications · GaN-based semiconductor devices and materials
参考文献 51
此处列出前 3 条
引用本文 140
按被引量排序,此处列出前 3 条