Sr-Based Sub/Surface Integrated Layer and Bulk Doping to Enhance High-Voltage Cycling of a Ni-Rich Cathode Material
Longchao Wang, Youqi Chu, Yutong Nong, Fenghua Zheng, Yu Li, Yizhen Huang, Yahao Li, Qichang Pan 等 10 位
Guangxi Normal University China Three Gorges University
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM) can achieve a high capacity of more than 200 mAh g –1 at charging voltages above 4.5 V, but it suffers from severe capacity fading at a high voltage during cycling associated with the lattice oxygen evolution-induced phase and surface structure modifications. Therefore, the big challenge for improving electrochemical performance is suppressing the lattice oxygen loss at a high voltage. Here, a facile strategy to inhibit the lattice oxygen loss of a Ni-rich material at a high charging voltage by a simple Sr treatment method is reported. The Sr treatment leads to the formation of a Sr-based sub/surface integrated layer and induces the atomic rearrangement on the subsurface to form Sr-based perovskite-like Li x Sr 1– x TMO 3 (TM = Ni, Co and Mn) during the heat treatment process. The perovskite-like structure can adsorb the oxidized O α– to oxygen vacancies, transplant the pumped charges from the oxidized O α–, and reduce them back to O 2 – to inhibit the movement of oxidized oxygen anions at the charged NCM surface. Furthermore, the formed Sr 1– x HPO 4 outer layer can prevent NCM from corroding by HF in organic electrolytes. Meanwhile, bulk doping stabilizes the metal–oxygen bond by suppressing the Ni migration at a high charging voltage. The modified NCM thus exhibited a significantly enhanced high-voltage cycle stability with 82.3 and 80.1% of capacity retentions at 1C achieved after 250 cycles at 25 °C and 100 cycles at 60 °C, respectively. This work opened a new avenue to suppress the lattice oxygen loss via surface structure regulations in high-energy-density rechargeable batteries during high-voltage cycling.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Advancements in Battery Materials
Battery Modeling and Management · Advanced Battery Materials and Technologies
参考文献 60
此处列出前 3 条
引用本文 26
按被引量排序,此处列出前 3 条