Sustainable wood electronics by iron-catalyzed laser-induced graphitization for large-scale applications
Christopher Hubert Dreimol, Huizhang Guo, Maximilian Ritter, Tobias Keplinger, Yong Ding, Roman Günther, Erik Poloni, Ingo Burgert 等 9 位
ETH Zurich Institute for Building Materials Empa ZHAW Zurich University of Applied Sciences
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Ecologically friendly wood electronics will help alleviating the shortcomings of state-of-art cellulose-based “green electronics”. Here we introduce iron-catalyzed laser-induced graphitization (IC-LIG) as an innovative approach for engraving large-scale electrically conductive structures on wood with very high quality and efficiency, overcoming the limitations of conventional LIG including high ablation, thermal damages, need for multiple lasing steps, use of fire retardants and inert atmospheres. An aqueous bio-based coating, inspired by historical iron-gall ink, protects wood from laser ablation and thermal damage while promoting efficient graphitization and smoothening substrate irregularities. Large-scale (100 cm 2 ), highly conductive (≥2500 S m −1 ) and homogeneous surface areas are engraved single-step in ambient atmosphere with a conventional CO 2 laser, even on very thin (∼450 µm) wood veneers. We demonstrate the validity of our approach by turning wood into highly durable strain sensors, flexible electrodes, capacitive touch panels and an electroluminescent LIG-based device.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Nanomaterials and Printing Technologies
Laser Material Processing Techniques · Graphene research and applications