Ultrahigh strength aluminum alloy by green laser additive manufacturing
Tianshu Liu, Xin Wei Cheng, Jakub Mikula, Fern Lan Ng, Lianghua Xiong, Yuliang Zhao, Robert Laskowski, Junhua Luan 等 10 位
Agency for Science, Technology and Research Soochow University Singapore Institute of Manufacturing Technology Institute of Advanced Intelligence and Computing
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Infrared laser additive manufacturing of high-strength 7××× aluminum (Al) alloys is hindered by low absorptivity, high cracking-susceptibility, and insufficient precipitation strengthening. Herein, we investigate a new approach to process high-performance AA7075 by integrating green laser directed energy deposition (L-DED) with nano-TiC embedded composite AA7075 powder. The green laser achieves better energy-material coupling, enabling high-quality deposition at a lower laser power than conventional infrared lasers. The green laser also stabilizes the melt pool, reduces thermal gradients and elemental evaporation, and promotes more uniform grains with lower dislocation density. Heat treatment yields an ultra-high density of nano-scale η′ precipitates and GP zones (~2.13×1016 m−2) in the green laser deposited Al alloy, achieving a tensile yield strength of ~600 MPa, which is higher than forged AA7075 and almost all L-DED-processed Al alloys hitherto reported. This work presents an integrated material-process strategy for additive manufacturing of highly reflective, hot-crack-susceptible alloys using short-wavelength lasers. Cracking and poor laser absorption curbed additive manufacturing of high-strength aluminium alloys. Using a TiC/AA7075 composite powder and a green wavelength laser, researchers produced crack-free aluminum alloy with a yield strength of nearly 600 MPa.
逐年被引趋势
暂无年度引用数据
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Additive Manufacturing Materials and Processes
Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties