Al2O3-modified 7YSZ thermal barrier coatings for protection against volcanic ash corrosion

To prevent volcanic ash corrosion using thermal barrier coatings (TBCs), a novel method using Al 2 O 3 -modification was proposed to reduce molten CMAS wettability on TBCs surface through a lotus effect. Plasma spray-physical vapor deposition (PS-PVD), a third-generation method for TBCs fabrication, was adopted to deposit 7YSZ TBCs with a feather-like microstructure. Then, Al 2 O 3 modification was introduced to fabricate a dense Al 2 O 3 overlay with nano/micro-sized grains on the TBCs surface. The wetting ability of CMAS on APS/EB-PVD/PS-PVD 7YSZ TBCs was comparatively in situ observed at 1250 °C for 3600 s. The results indicated that the dense Al 2 O 3 overlay inhibited penetration of molten CMAS. Additionally, the micro/nano dual-sized structure, which is similar to the papillary structure of a lotus leaf, reduced molten CMAS wettability on the TBCs surface. The results demonstrated that the Al 2 O 3 -modified TBCs had better CMAS corrosion resistance than the as-deposited APS/EB-PVD/PS-PVD TBCs.