High Tensile Ductility and Strength in Dual-phase Bimodal Steel through Stationary Friction Stir Processing
Harpreet Singh Arora, Aditya V. Ayyagari, Jaskaran Singh Saini, Karthikeyan Tamil Selvam, S. Riyadh, Mayur Pole, Harpreet Singh Grewal, Sundeep Mukherjee
Shiv Nadar University University of North Texas Argonne National Laboratory Center for Nanoscale Materials
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
The combination of high strength and good ductility are very desirable for advanced structural and functional applications. However, measures to enhance strength typically lead to ductility reduction due to their inverse correlation, nano-grained structures for an instance. Bi-modal grain structure is promising in this regard, but its realization is limited by multiple complex processing steps. Here, we demonstrate a facile single-step processing route for the development of bimodal grain structure in austenitic stainless steel, SS316L. The bimodal structure comprised of fine martensite grains (<500 nm) sandwiched between coarse austenite grains (~10 µm). The dual-phase bimodal structure demonstrated higher yield strength (~620 MPa) compared to ultra-fine grain structure (~450 MPa) concurrent with high uniform tensile ductility (~35%). These exceptional properties are attributed to unique dual-phase, bimodal grain structure which delayed the onset of plastic instability resulting in higher strength as well as larger uniform elongation and work-hardening rate. Our approach may be easily extended to a wide range of material systems to engineer superior performance.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Microstructure and Mechanical Properties of Steels
Microstructure and mechanical properties · Advanced Welding Techniques Analysis