Topology optimization of wheel spoke cavities for lightweight design under bending fatigue and impact load cases
Guangdong Zhang, Xin Cui, Yongxing Zang, Yangyang Zhou, Jianjun Lu, Zhansheng Li, Haitao Yang, Jiandong Wang 等 11 位
Yancheng Institute of Technology
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
This paper presents a Multi-Load-Case topology optimization framework for aluminum alloy wheels to overcome the limitations of empirical rear-cavity lightweight designs. To balance structural integrity and mass reduction without altering the aerodynamic outboard styling, a region-constrained topology optimization was conducted. By employing a compromise programming method based on strain energy ratios, the weighting coefficients for bending fatigue and 13° impact load cases were scientifically calibrated. Furthermore, manufacturing constraints, including a 10 mm minimum member size and draw directions, were incorporated to ensure direct compatibility with conventional casting. The results demonstrate that the optimized depth-gradient cavities successfully reduced the peak von Mises stress for bending fatigue by 19.25% (from 133.9 to 108.13 MPa) and for the 13° impact by 14.57% (from 74.63 to 63.76 MPa), alongside a slight mass reduction of 0.53%. This approach offers a mathematically rigorous and industrially viable paradigm for the multi-objective lightweight design of high-performance automotive components.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Topology Optimization in Engineering
Cellular and Composite Structures · Engineering Applied Research
参考文献 30
此处列出前 3 条
引用本文 2
按被引量排序,此处列出前 3 条