Analytical calculation of the RMS current stress on the DC-link capacitor of voltage-PWM converter systems
Johann Walter Kolar, S.D. Round
ETH Zurich
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
A simple analytical expression for the current stress on the DC-link capacitor caused by the load-side inverter of a voltage DC-link-converter system is derived. The DC-link capacitor-current RMS value is determined from the modulation depth and by the amplitude and the phase angle of the inverter output current assuming a sinusoidal inverter output current and a constant DC-link voltage. Despite neglecting the output-current ripple, the results of the analytical calculation are within 8% of measurements made from digital simulation and an experimental system, even if the output-current ripple is relatively high as in the case of low-frequency IGBT inverter systems. The simple analytical expression provides significant advantages over simulation methods for designing the DC-link capacitor of PWM converter systems.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Multilevel Inverters and Converters
Advanced DC-DC Converters · Electric Power Systems and Control