Micro-grinding temperature prediction considering the effects of crystallographic orientation
Man Zhao, Xia Ji, Steven Y. Liang
Georgia Institute of Technology Donghua University
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Tensile stress and thermal damage resulting from thermal loading will reduce the anti-fraying and anti-fatigue of workpieces, which is undesirable for micro-grinding, so it is imperative to control the rise of temperature. This investigation aims to propose a physical-based model to predict the temperature with the process parameters, wheel properties and material microstructure taken into account. In the calculation of heat generated in the micro-grinding zone, the triangular heat-flux distribution is adopted. The reported energy partition model is also utilized to calculate the heat converted into the workpiece. In addition, the Taylor factor model is used to estimate the effects of crystallographic orientation (CO) and its orientation distribution function (ODF) on the workpiece temperature by affecting the flow stress and grinding forces in micro-grinding. Finally, the physical model is verified by performing micro-grinding experiments using the orthogonal method. The result proves that the prediction matches well with the experimental values. Besides, the single-factorial experiments are conducted with the result showing that the model with the consideration of the variation of Taylor factor improves the accuracy of the temperature prediction.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Advanced machining processes and optimization
Advanced Surface Polishing Techniques · Advanced Machining and Optimization Techniques
参考文献 28
此处列出前 3 条
引用本文 3
按被引量排序,此处列出前 3 条