Analysis on Mode Transition in a Dual-Mode Scramjet Combustor
Jianping Li, Rongjia Jin, Guiqian Jiao, Wenyan Song
Northwestern Polytechnical University
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
An ignition combustion test of different combustor configurations and different fuel equivalence ratios was carried out in a condition of total temperature at 880 K, total pressure at 8 atm, and Mach number of 2.0 in regards to dual-mode combustor. There are three combustor configurations that are dual-mode combustors with double cavity flame holder. Hydrogen is injected in the first cavity while kerosene is injected in front of the first cavity. Hydrogen, being a pilot flame, was the first to be ignited by the spark, then kerosene was ignited by hydrogen. After that, injection of hydrogen was stopped and sole kerosene was kept burning steadily. The distribution of other airflow parameters in the combustor was obtained by calculating with a 1D analysis method; the influence of combustor configuration and fuel equivalence ratio to combustion mode transition was analyzed. The results indicated that the gradual transition of combustion mode in the combustor from supersonic combustion mode to subsonic combustion mode was accompanied by increasing the fuel equivalence ratio. The disturbance arising from wall pressure rise of the combustor was gradually moved upstream. The subsonic combustion area in Model 2 was moved by 60 mm upstream when compared with that in Model 1, which was basically in conformity with the distance that the initial position of the first cavity in Model 2 was moved by 58 mm forward. When the fuel equivalence ratio was equal, the length of subsonic combustion areas in the two models was basically unchanged. In the case of combined combustion of hydrogen and kerosene, the pressure disturbance had been spread upstream and arrived at the entrance to the combustor; thus, the inlet Mach number condition of the entrance to the combustor was damaged. The damage to the condition of the entrance to the combustor was more serious to some extent in Model 2 due to antedisplacement of the first cavity when compared with that in Model 1.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Computational Fluid Dynamics and Aerodynamics
Combustion and flame dynamics · Heat transfer and supercritical fluids
参考文献 13
此处列出前 3 条
引用本文 13
按被引量排序,此处列出前 3 条