Investigation on Detonation and Thermochemical Parameters of Aluminized ANFO
A. Maranda, Andrzej Papliński, D. Gałęzowski
Military University of Technology in Warsaw
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Detonation parameters of aluminized ANFO are analyzed. Explosive compositions based on porous ammonium nitrate were investigated. Two kinds of alumnium, flakes of below 0.075 mm size and powder of dimensions below 1.5 mm were added. Diesel oil of 1.3°E viscosity was used as a moderator. The velocity of detonation of investigated explosive mixtures was measured for charges placed in PCV and steel tubes. The critical detonation diameter was estimated, and work performance capacity was appraised by lead block and ballistic mortar tests. The detonation parameters velocity, pressure, and heat liberated in the C-J point as well as pressure and heat of constant volume explosion are evaluated and analyzed.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
材料 / 化学Energetic Materials and Combustion
Combustion and Detonation Processes · Blasting Impact and Analysis