Embedment stiffness prediction of smooth dowel-type fasteners in glued-laminated timber
Congcong Zhang, Huifeng Yang, Yang Tian, Wenjie Chen, Haotian Tao, Benkai Shi
Nanjing Tech University
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
In timber structures, embedment properties (embedment strength and stiffness) are important parameters that respectively determine the load-carrying capacity and stiffness of dowel-type connections. However, research on embedment stiffness is limited, particularly regarding prediction formulas for smooth steel dowels in glued-laminated timber. This study conducted half-hole embedment tests on a total of 340 specimens according to the ASTM D5764-97a standard, with influencing factors including wood density, dowel diameter, load-to-grain angle, and specimen thickness. Digital Image Correlation (DIC) measurement technology was utilized during loading. The failure modes, embedment stress-displacement curves, embedment strength, and the influence of different factors on embedment stiffness were discussed and analyzed. The results indicated that, compared to dowel diameter, wood density and load-to-grain angle have a more substantial influence on embedment stiffness. Specifically, embedment stiffness increased significantly with wood density but decreased notably as the angle increased. Based on the test results, a new prediction formula for embedment stiffness was developed through non-linear regression analysis. It was also validated through the experimental results and reported results from literature. The proposed formula will facilitate the use of connection stiffness model and reduce the need for embedment tests for numerous combinations of wood density, fastener diameter, and loading angle.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Wood Treatment and Properties
Structural Load-Bearing Analysis · Engineering Structural Analysis Methods