Behavior of U-Zr Alloy Containing Simulated Fission Products during Anodic Dissolution in Molten Chloride Electrolyte

To investigate the distribution of fission product elements in the electrorefining of spent metallic fuel, electrorefining tests were carried out using U-Zr alloy containing simulated fission products. An intermediate region was found between undissolved alloy and Zr-rich regions formed by the anodic dissolution of uranium. The composition of this region determined by wavelength-dispersive X-ray spectroscopy (WDS) analysis corresponded to that of δ-phase (63–78 at% Zr) in the U-Zr binary phase diagram. This region is expected to form in the course of the anodic dissolution sequence that begins from an undissolved U-Zr alloy and ends with a Zr-rich region. From the results of chemical and WDS analyses of anode residue samples, it was predicted that noble metals would stay in the anode residue as long as zirconium remains even after most of the uranium in the alloy was dissolved. Analytical results indicated no large difference betweenthe noble metal behavior in simulated material and in irradiated EBR-II driver fuels. Decontamination factors of uraniumfrom molybdenum and palladium were defined as ratios between their concentrations in the initial alloy loaded into an anode and those in cathode products, and evaluated from the analytical results. Although there was some scattering of data, decontamination factors of around 70 for molybdenum and 10 for palladium would be expected.