Analyses of Anodic Behavior of Metallic Fast Reactor Fuel Using a Multidiffusion Layer Model
Masatoshi Iizuka, Hirotake Moriyama
Central Research Institute of Electric Power Industry Kyoto University Institute for Integrated Radiation and Nuclear Science, Kyoto University
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Anodic behavior of U-Zr or U-Pu-Zr alloys during electrorefining in molten chloride electrolyte was modeled on the basis of recent findings from the observation of anode residues after a number of electrorefining tests, such as the formation of an intermediate region that has a composition corresponding to the δ phase. Simulation of anodic dissolution of the U-Zr alloy during the engineering-scale electrorefining tests using the model showed that the calculated dissolution ratios of uranium and zirconium were in agreement with the experimental results when the alloy pin was chopped to as short as 5mm. Three runs of laboratory-scale electrorefining tests with uncladded U-Pu-Zr ternary alloy were also simulated. The characteristic change of the anode potential during these tests was well reproduced in the calculation using the fitting parameters for uranium activity in the porous zirconium layer. The results of some predictive calculations showed that the required period to attain a certain uranium dissolution ratio is drastically increased with the increase in pin length, and that the zirconium dissolution ratio is largely increased when a higher anodic current density is applied to improve the electrorefining processing rate.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
化学Molten salt chemistry and electrochemical processes
Nuclear Materials and Properties · Radioactive element chemistry and processing