Ribbing without tooling: additive manufacturing of thermoplastic ribs on thermoset skins enabled by co-cured thermoplastic interphases
Matthias Taubert, R. Welker, Bruno Musil, Philipp Höfer
Universität der Bundeswehr München Wehrwissenschaftliches Institut für Werk- und Betriebsstoffe
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
This work evaluates tooling-reduced ribbing by printing thermoplastic stiffeners onto thermoset composite skins via co-cured, directly printable thermoplastic interphases. A helicopter door demonstrator provides the application context for localized reinforcement features in regions where SMC processing is constrained by limited flow and tooling-driven draft angles. Two material routes were investigated on M18/1 CFRP coupons as repeatable screening platforms. PEI served as a high-temperature reference interphase for printing PEI and PPSU, while PC was evaluated as a lower-temperature interphase for printing PETG. Differential scanning calorimetry was used to define substrate-temperature levels, and single-lap-shear tests provided first-order indicators of interface quality and process sensitivity. The results reveal a coupled thermal process window: insufficient activation leads to weak bonding, whereas excessive thermal exposure reduces lapshear strength despite successful deposition. An analytical model further quantifies the lightweighting potential of eliminating demolding draft angles, showing double-digit crosssectional mass savings for typical rib proportions.
逐年被引趋势
暂无年度引用数据
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Additive Manufacturing and 3D Printing Technologies
Fiber-reinforced polymer composites · Material Properties and Applications
参考文献 49
此处列出前 3 条