Investigation of tensile properties, hardness, and morphology of h-BN and MoS 2 filler modified carbon fabric/epoxy composites
Yermal Shriraj Rao, Basavannadevaru Shivamurthy, Nanjangud Mohan, Nagaraja Shetty, Sanjay Mavinkere Rangappa, Suchart Siengchin
Manipal Academy of Higher Education King Mongkut's University of Technology North Bangkok
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
The present study aims to improve the tensile and hardness properties of carbon fabric–reinforced epoxy composite (CFEC) by using hexagonal boron nitride (h-BN) and molybdenum disulfide (MoS2) fillers. Magnetic stirring and ultrasonication were used to disperse fillers in epoxy resin. CFEC, h-BN filled CFEC and MoS2 filled CFEC fabricated as per hand layup and vacuum bag technique. The tensile strength of CFEC was remarkably improved up to 6 wt.% h-BN and MoS2 addition separately in the resin matrix. The maximum tensile strength of 486 MPa and Young’s modulus of 44 GPa were noticed in 6 wt.% h-BN incorporated CFEC displaying 59% and 47% improvements, respectively. The maximum toughness is shown by 6 wt.% MoS2 incorporated CFEC indicating 102% improvement. The uniformly dispersed high-performance filler in the epoxy effectively transferred stress, improving tensile properties. However, filler agglomerates, stress-raising spots, and poor filler–matrix interaction beyond 6 wt.% filler reduced the tensile property improvement. The introduction of h-BN and MoS2 in the composite increased hardness, with 6 wt.% h-BN added CFEC recording the highest hardness denoting 23% greater than the neat CFEC.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
材料 / 化学Polymer Science and Applications
Fiber-reinforced polymer composites · Epoxy Resin Curing Processes