Optimal design of solid rocket motor nozzle under two-phase flow
Xinhui Tian, Zhensheng Sun, Zhibo Zhang, Yin Zhang, Zhi‐Hui Zhang, Liushuo Fu
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
To enhance the performance of solid rocket motor nozzles, six design parameters were selected as variables: transition arc radius, exit half-angle, major axis, minor axis, convergence section arc radius, and initial expansion section radius. A multi-objective optimization study under two-phase flow conditions was conducted using Isight. First, parameter sensitivity analyses were performed using both single-phase and two-phase flow calculation methods. The results indicated that the minor axis b of the elliptical design had the most significant impact on the thrust coefficient and specific impulse. Next, surrogate models based on Kriging interpolation were constructed for the baseline nozzle flow field using both indirect and direct optimization methods, followed by a three-objective optimization process. The optimization targets included the thrust coefficient, specific impulse, and total pressure recovery coefficient. The second-generation Non-Dominated Sorting Genetic Algorithm (NSGA-II) was employed to analyze and solve the surrogate models. The computational results revealed that, compared to the baseline nozzle, both optimization methods significantly improved performance parameters by approximately 2%. While the direct optimization method yielded slightly better performance gains, the indirect optimization method required lower computational costs.
逐年被引趋势
暂无年度引用数据
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Rocket and propulsion systems research
Advanced Multi-Objective Optimization Algorithms · Computational Fluid Dynamics and Aerodynamics