Experimental Study on Joint Properties of Steel Secondary Beam Connected with Concrete Main Beam Using an Embedded Part
Xiaohong Sun, Xiaoxiao Feng, Shutong Yang, Shenglin Li, Yanqiang Wang
Shandong Electric Power Engineering Consulting Institute Corp Ocean University of China
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
In this paper, a joint of I-shaped steel secondary beam connected with concrete main beam using an embedded part was simplified from a practical engineering by adopting the scale 1:3. Six specimens were tested. The effects of different concrete main beam heights (245 mm and 295 mm), concrete floor slab, rigidity of steel secondary beam and height difference between the secondary beam and main beam tops on the mechanical performance and failure mode of specimens were analyzed. Results show that flexural failure is often found in the steel secondary beam. But the failure mode is changed to joint failure in the main beam if the rigidity of steel beam is increased locally at the mid-span region. Moreover, setting floor slab and increasing rigidity of steel secondary beam can all improve the load-carrying capacity of the joint. The safety of joint can be obtained by strengthening the stirrups adjacent to the embedded part and longitudinal steel bars under the part.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Structural Load-Bearing Analysis
Structural Behavior of Reinforced Concrete · Structural Engineering and Materials Analysis