The room temperature superplastic mechanism of Sn-58Bi alloy fabricated by laser powder bed fusion
Hantao Zhang, Yonghao Zhang, Shenghua Wu, Chuan Yang, Liping Deng, Bingshu Wang, Shuke Huang, Yang Miao 等 10 位
China Academy of Engineering Physics Fuzhou University Xi'an Jiaotong University
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Sn–58Bi specimens produced through severe plastic deformation (SPD) typically exhibit excellent superplastic properties. However, the dimensions of SPD-prepared specimens are limited, and the process involves complex multistep procedures, which limit their practical engineering applications. Therefore, developing alternative fabrication techniques with greater flexibility and scalability is particularly important. In this study, a Sn–58Bi alloy was fabricated using laser powder bed fusion (LPBF). After the processing parameters were optimized, Sn–58Bi with remarkable superplasticity was successfully fabricated via additive manufacturing for the first time. Tensile tests revealed elongations to failure of 740% at room temperature (298 K) and 1 395.5% at 353 K. In situ scanning electron microscopy (SEM) and electron backscatter diffraction (EBSD) analyses indicated that grain boundary sliding (GBS) and phase boundary sliding (PBS), which are predominantly influenced by diffusion processes, were the primary mechanisms of superplastic deformation in the LPBF-fabricated Sn–58Bi alloy. This study provides a new strategy for enhancing alloy ductility through LPBF and offers theoretical insights into the additive manufacturing of superplastic polycrystalline alloys.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Additive Manufacturing Materials and Processes
Microstructure and mechanical properties · Cellular and Composite Structures