Local charge homogenization strategy enables ultra-high voltage tolerance of polyether electrolytes for 4.7 V lithium metal batteries
Yuanlong Wu, Piao Luo, Kexin Su, Mao Yu, Xin Yu Song, Lianzhan Huang, Shaocong Zhang, Huiyu Song 等 11 位
Guangdong Key Laboratory of Fuel Cell Technology South China University of Technology Southern University of Science and Technology Guangdong Provincial Key Laboratory of Advanced Energy Storage Materials
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
In-situ fabricated polyether electrolytes have been regarded as one of the most promising solid electrolyte systems. Nevertheless, they cannot match high-voltage cathodes over 4.3 V due to their poor oxidative stability. Herein, we propose an effective local charge homogenization strategy based on the triglycidyl isocyanurate (TGIC) crosslinker, achieving ultra-high-voltage electrochemical stability of polyether electrolytes (viz. PTIDOL) at cutoff voltages up to 4.7 V. The introduction of TGIC optimizes the Li+ solvation environment, thereby homogenizing the charge distribution at ether oxygen (EO) sites, resulting in significantly enhanced oxidative stability of the polyether main chain. Consequently, the Li|PTIDOL|LiNi0.6Co0.2Mn0.2O2 (NCM622) cell achieves long-term operation at an ultra-high cutoff voltage with a capacity retention of 81.8% after 400 cycles, one of the best results reported for polyether electrolytes to date. This work provides significant insights for the development of polyether electrolytes with high-voltage tolerance and the advancement of high-energy-density batteries.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Advanced Battery Materials and Technologies
Advancements in Battery Materials · Aqueous and Flow Batteries