Characterization of the annealing behavior for copper-filled TSVs
P. Saettler, Mathias Boettcher, K.-J. Wolter
Technische Universität Dresden All Silicon System Integration Dresden
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Herein we describe the annealing behavior of copper Through Silicon Vias (TSVs) in a series of experiments. Temperatures ranged from 150°C to 450°C and the dwell of the temperature varied between 30 min and 4 h. Copper protrusion, test samples warpage and the copper microstructure were examined in a subsequent characterization. Combining the results of these measurements enables the determination of an optimized temperature and dwell set, which avoids further protrusion and minimizes stress after annealing. Additionally, the data analysis shows a temperature- and dwell-dependency of copper protrusion and die warpage. Electron backscatter diffraction (EBSD) measurements on TSV cross sections show changes of the micro structure. Hence it could be verified that copper underwent grain growth during annealing. The described investigations represent a new systematic approach for the characterization of the copper annealing behavior in TSVs. The evaluation of the specific experiments and the comparison between different annealing conditions enable insights into the structural changes of the material during the annealing process. With help of the implemented characterization this approach succeeds in giving optimized settings for the TSV annealing process. Based on the measurement data it is possible to choose a suitable temperature and dwell process set depending on subsequent redirection layer (RDL) processing steps. Furthermore a model for the annealing procedure in TSVs is derived from the measurement results.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程3D IC and TSV technologies
Electronic Packaging and Soldering Technologies · Copper Interconnects and Reliability