Reliability and Microstructure Characterization of Through-Silicon Vias (TSV) at Different Aspect Ratios Using EBSD-Raman Spectroscopy
Shuhang Lyu, Thomas E. Beechem, Tiwei Wei
Purdue University West Lafayette
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
As microelectronics continuously scale down, three-dimensional integration using through silicon vias (TSVs) becomes crucial for improving system performance and functionality. The need for fine-pitch, high-density interconnect drives the demand for TSVs with smaller diameters and larger aspect ratios. In this study, the impact of aspect ratio on the thermomechanical response of TSVs is experimentally investigated. We developed the process flow for TSVs with a diameter of 3 µm and aspect ratios of 4:1, 7:1, and 10:1. Two types of defects in direct current plating, namely pores and “pinch-off”, are overcome by utilizing reverse pulse current. The thermomechanical stress and microstructure evolution of TSVs under different aspect ratio is investigated. In addition, the residual stress within the surrounding Si induced by thermal annealing is imaged with Raman spectroscopy. With increasing aspect ratio, the general stress distribution around the TSV remains qualitatively similar even as the magnitude of the peak stress value decreases from −100 MPa to −20 MPa. The inverse relationship with stress and aspect ratio is geometric, rather than microstructural, in origin. Electron backscatter diffraction (EBSD) was used to quantify a mean grain size of the annealed TSVs close to the radius of via (−1.5 µm), regardless of aspect ratio, electrodeposited microstructure, or location along the depth of the via. Together, it suggests that while the aspect ratio of TSV has trivial influence on the mean grain size, a higher aspect ratio provides a smaller impact on the stress of surrounding silicon.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程3D IC and TSV technologies
Copper Interconnects and Reliability · Electronic Packaging and Soldering Technologies