Application of CAMM2 Connector on PCIe Gen 6.0 SSD Host Interface for Low Near-End Crosstalk
Sungwoo Jin, Jinwook Song, Seokwoo Hong, Young-Jun Ko, Hyunwoo Kim, Sungwon Roh, Chorom Jang, Dongho Choi 等 10 位
Samsung (South Korea) Samsung Electronics (South Korea)
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
The M.2 connector has been widely adopted in the host interface of client Solid State Drives (SSDs) for high-speed data storage in consumer electronics. The pin arrangement of the M.2 connector, where transmitter (TX) and receiver (RX) lines are positioned adj acent, can lead to issues such as near-end crosstalk (NEXT). Particularly, with the upcoming PCI Express (PCIe) Gen 6.0 standard, concerns arise over the potential degradation of NEXT in M.2 connectors, which could negatively affect SSD performance and reliability. This paper analyzes the signal integrity (SI) requirements for connectors to ensure the host interface of SSDs operates reliably at PCIe Gen 6.0 speed. We investigate whether the NEXT in existing M.2 form factors for client SSDs meets these requirements and experimentally examine its impact on PCIe Gen 6.0 64 Gb/s PAM-4 eye diagram at the system level. Furthermore, by applying Compression Attached Memory Module 2 (CAMM2) to the SSD PCIe interfaces, we experimentally demonstrate the capability to reduce NEXT by over 50 % compared to M.2 and limit PAM-4 eye degradation to less than 1 %. This illustrates how CAMM2 connector can overcome the limitations of M.2 connector and enhance performance in PCIe Gen 6.0.
逐年被引趋势
暂无年度引用数据
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Electromagnetic Compatibility and Noise Suppression
Advanced Data Storage Technologies · Embedded Systems and FPGA Applications
参考文献 1
此处列出前 3 条