120 W Efficient Single Frequency Amplification Based on Wide Tunable 1018 nm DBR Seed Source
Pan Li, Linfeng Li, Kaiming Cao, Ruihong Gao, Heshan Liu, Meng Shi, Ziren Luo
Chinese Academy of Sciences Institute of Mechanics National Space Science Center
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
High-power, widely tunable 1018 nm singlefrequency fiber lasers and their harmonics play a crucial role in Rydberg microwave measurement applications. This study focuses on the development of a high-power 1018 nm singlefrequency narrow-linewidth fiber laser amplifier based on a DBR single-frequency seed source. The DBR seed source, constructed using an 8 mm-long doped fiber, achieves a linewidth of 3.25 kHz and demonstrates a wavelength tuning range exceeding 1.51 nm across a temperature range of -10°C to 120°C. The tuning process exhibits excellent linearity between wavelength and temperature, with no observed mode hopping. To ensure high ASE and SBS suppression in the amplified output, a fourstage amplification and filtering scheme was implemented. By carefully selecting optical fibers and optimizing their lengths, the system achieves an output power exceeding 120 W for the 1018 nm single-frequency laser. Experimental results demonstrate a light-to-light conversion efficiency of over 77% in the main amplification stage, with an ASE suppression ratio greater than 60 dB. The amplified laser exhibits an output linewidth of 10.3 kHz and maintains exceptional beam quality, with an M² factor of less than 1.3. These results highlight the effectiveness of the proposed design for high-power, narrow-linewidth laser applications.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Photonic Crystal and Fiber Optics
Advanced Fiber Laser Technologies · Semiconductor Lasers and Optical Devices