Differential Amplifier Based on Cherry-Hooper Topology for UWB M-sequence Radars
Miroslav Sokol, Pavol Galajda, Stanislav Slovák, Martin Pečovský
Technical University of Košice
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
The paper describes the basic measurement of PCB assembled differential amplifier for UWB M-sequence radar. The amplifier structure is based on Cherry-Hooper differential amplifier topology. This amplifier was designed and manufactured in AMS 0.35 μm SiGe BiCMOS technology. The amplifier has been wires bonded and assembled directly on the PCB. Proposed structure was designed for 13 GHz bandwidth with 15 dB single-ended gain. The scattering and dynamic parameters, as well as the signal from radar, were measured. Power consumption is 135 mA from -3.3 V power supply and the amplifier was primarily designed for UWB directional coupler for M-sequence radar applications.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Radio Frequency Integrated Circuit Design
Analog and Mixed-Signal Circuit Design · Radar Systems and Signal Processing