Fast Wafer Level Reliability Monitoring: Quantification of Plasma-Induced Damage Detected on Productive Hardware
Andreas Martin, Christoph Bukethal, Karl-Henrik Ryden
Infineon Technologies (Germany)
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
This paper describes the investigation of a Plasma-Induced Damage (PID) event in the metal stack of an 8-in 130-nm-high volume process line. The relevant PID stress and measurement sequence used during standard productive fast Wafer Level Reliability Monitoring, which had detected this event, is discussed, and it is shown to be very effective. Additionally, hot carrier stress was performed on MOS transistors with antenna structures connected to the gate electrode for the quantification of the effect of PID on MOS device characteristics. It is demonstrated that the complete investigation can be done on production wafers in a very short time and only on scribe line test structures, saving time and hardware cost for extra wafers.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Integrated Circuits and Semiconductor Failure Analysis
Semiconductor materials and devices · Copper Interconnects and Reliability