A New Method for Measuring Winding AC Resistance of High-Efficiency Power Inductors
Farideh N. Javidi, Morten Nymand
University of Southern Denmark
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Precise estimation of high-frequency winding resistance is essential for designing high-efficiency power inductors. The ac resistance for high-efficiency inductors can be estimated using analytical methods or simulation-based approaches but it must be verified with measurement. Impedance analyzers as a common method for measuring ac resistance of high-frequency inductor windings perform noticeably poor for high quality factor Q inductors (high-efficiency inductor with a small resistive element). This paper proposes a new simple and highly effective method to measure the ac resistance of high-frequency power inductors (up to at least 110 MHz). In this method, a thin auxiliary winding is added to the inductor to create access to a measurement node, which effectively reduces the series inductance seen by the impedance analyzer to the parasitic leakage inductance of the inductor. Thereby it effectively eliminates the impact of inductor main magnetizing inductance in the impedance measurement. The proposed measurement method is compatible with existing four terminal pair fixture of impedance analyzers. Using a proposed modified test fixture for Agilent 4294A, the ac resistance of two high-Q sample inductors is measured. Experimental results show a very substantial improvement with respect to the traditional four-terminal test fixture. A convincing agreement with the two-dimensional finite element method simulation results in COMSOL is also demonstrated.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Advanced DC-DC Converters
Electromagnetic Compatibility and Noise Suppression · Wireless Power Transfer Systems