Direct Integration of Optimized Phase-Change Heat Spreaders Into SiC Power Module for Thermal Performance Improvements Under High Heat Flux
Wei Mu, Laili Wang, Binyu Wang, Tongyu Zhang, Fengtao Yang, Yongmei Gan, Hong Zhang
Xi'an Jiaotong University
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Silicon carbide (SiC) power modules are attractive in many applications due to the superiority of their semiconductor characteristics. However, power modules are subjected to repetitive thermo-mechanical stress caused by the mismatch of the coefficient of thermal expansion between different layers of materials. Moreover, the relatively smaller die size of SiC chips makes the heat flux increase significantly, which brings new challenges to the thermal management and reliability of SiC power modules. To tackle these challenges, this article proposes a new thermal enhanced packaging method based on vapor chamber (VC) phase change heat spreader (PCHS) for SiC power modules, achieving the advantages of high thermal conductivity, low weight, low cost, and low thermal stress. In this new design, SiCmosfetbare dies are directly soldered on the top of VC-PCHS, which not only act as heat spreaders but also conduct the drain current ofmosfets. The integrated VC-PCHS is optimized based on thermal and thermomechanical performance. An SiC power module prototype directly integrated with VC-PCHS is built using a new fabrication process. Both the simulations and experiments demonstrate significant improvements in thermal and thermomechanical performance. The modules integrated with VC-PCHS can operate under 200 W of power dissipation per die (632 W/cm2) without exceeding the maximum rated junction temperature. This article reveals the potential of directly integrating phase change cooling components inside power modules, providing a new solution to improve the thermal performance and reliability of SiC power modules without adding complexity and energy consumptions to external cooling systems.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Silicon Carbide Semiconductor Technologies
Electronic Packaging and Soldering Technologies · Heat Transfer and Boiling Studies