Modeling Methodology of Magnetic Toroidal Cores for 3-D FEM Full-Wave Simulation up to 100 MHz
Rafael Suárez, Maria Tijero, Roberto Moreno, José Manuel González
University of the Basque Country Ikerlan
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
This paper presents a full-wave 3-D FEM simulation methodology for magnetic toroidal cores up to 100 MHz. 3-D FEM simulation of magnetic toroidal cores has gained significant relevance in recent years. However, the use of magnetic materials in simulation presents some difficulties. Complex permeability is typically the only electromagnetic property used in magnetic toroidal cores' simulation. Nonetheless, recent results suggest that other properties must also be considered in high-frequency simulations. The presented methodology is particularly practical as it accurately models commercial cores easily. Electromagnetic properties valid for simulation are directly extracted from the cores with two simple setups. No complex fixtures or sample modification are required. Two ferrites (MnZn and NiZn) and a nanocrystalline core are studied. Complex permeability is characterized with a largely used method, and complex permittivity is extracted directly from the cores using the parallel plate capacitor method. With this methodology, cores' electromagnetic models are achieved, which are validated by comparing 3-D FEM simulations of several inductors with their measurements. Results lead to a simple and practical methodology to perform small-signal cores simulation in linear zone up to 100 MHz, which had not been achieved so far.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
材料 / 化学Magnetic Properties and Applications
Electromagnetic Simulation and Numerical Methods · Electromagnetic Compatibility and Noise Suppression