Generic Approach for Risk Assessment of Offshore Piping Subjected to Vibration Induced Fatigue
Arvind Keprate, R. M. Chandima Ratnayake
University of Stavanger
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Vibration induced fatigue (VIF) failure of topside piping is one of the most common causes of the hydrocarbon release on offshore oil and gas platforms operating in the North Sea region. An effective inspection plan for the identification of fatigue critical piping locations has the potential to minimize the hydrocarbon release. One of the primary challenges in preparation of inspection program for offshore piping is to identify the fatigue critical piping locations. At present, the three-staged risk assessment process (RAP) given in the Energy Institute (EI) guidelines is used by inspection engineers to determine the likelihood of failure (LoF) of process piping due to VIF. Since the RAP is afflicted by certain drawbacks, this paper presents an alternative risk assessment approach (RAA) to RAP for identification and prioritization of fatigue critical piping locations. The proposed RAA consists of two stages. The first stage involves a qualitative risk assessment using fuzzy-analytical hierarchy process (FAHP) methodology to identify fatigue critical systems (and the most dominant excitation mechanism) and is briefly discussed in the paper. The fatigue critical system identified during stage 1 of RAA undergoes further assessment in the second stage of the RAA. This stage employs a fuzzy-logic method to determine the LoF of the mainline piping. The outcome of the proposed RAA is the categorization of mainline piping, into high, medium, or low risk grouping. The mainline piping in the high-risk category is thereby prioritized for inspection. An illustrative case study demonstrating the usability of the proposed RAA is presented.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Structural Integrity and Reliability Analysis
Risk and Safety Analysis · Fatigue and fracture mechanics