Surface Texture Characterization of Metal Selective Laser Melted Part With Varying Surface Inclinations
Shubhavardhan Ramadurga Narasimharaju, Weidong Liu, Wenhan Zeng, Tian Long See, Paul J. Scott, Xiangqian Jiang, Shan Lou
University of Huddersfield Manufacturing Technology Centre (United Kingdom)
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Additive manufacturing offers the advantage of infinite freedom to design and fabricate complex parts at reduced lead-time. However, the surface quality of additively manufactured parts remains well behind the conventionally processed counterparts. This paper aims to systematically investigate the impact of varying surface inclination angles with respect to the build direction on the resultant surface textures. A bespoke metal truncheon artifact with inclination angles varying from 0 deg to 180 deg was built by selective laser melting. Focus variation microscopy was used to measure the topography of inclined surfaces with a tilt angle of up to 132 deg. The measurement data were then analyzed to characterize the staircase effect and the particles adherent to the artifact surface. Areal surface texture parameters, including height parameters, spatial parameters, functional parameters, and feature parameters, were explored to quantify the general surface topography, the staircase effect, and the particle features. The areal surface texture characterization and particle analysis reveal the resulted surface topographies are strongly correlated with the surface inclination angles.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Additive Manufacturing Materials and Processes
Surface Roughness and Optical Measurements · Tribology and Lubrication Engineering