Effect of Trimmed Rear Shroud on Performance and Axial Thrust of Multi-Stage Centrifugal Pump With Emphasis on Visualizing Flow Losses
Yandong Gu, Hao Sun, Chuan Wang, Rong Lu, Benqing Liu, Jie Ge
Yangzhou University Jiangsu University
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Multi-stage centrifugal pumps are frequently used in high-lift applications and consume considerable energy, but suffer from poor performance and large axial force. The rear shroud of impeller is trimmed for reducing axial thrust, but this degrades performance. This study analyzes performance degradation and optimizes performance and axial force. Experiments and simulations are conducted on different ratios of rear shroud to front shroud (λ). Total pressure losses are calculated, and flow losses are visualized using the entropy generation method. Both measured and simulated performances decrease as the rear shroud is trimmed. Designs with different λ meet the head coefficient requirement of 1.1. However, λ of 0.86 has the best efficiency of 42.7%, λ of 0.83 reaches 42.5%, λ of 0.8 shows the lowest efficiency of 39.9%. Efficiency in the middle channel improves as the rear shroud is trimmed, but this cannot offset increased losses in the impeller and rear side chamber. Entropy production is exacerbated in the axial passage between impeller and rear side chamber due to the collision between impeller-driven flow and pressure-driven backflow. When λ is reduced by 0.03, axial thrust drops by 7%. To compromise between performance and axial thrust, λ should be designed at 0.83.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Turbomachinery Performance and Optimization
Cavitation Phenomena in Pumps · Physics and Engineering Research Articles