Optimization of Y-Shaped Micro-Mixers With a Mixing Chamber for Increased Mixing Efficiency and Decreased Pressure Drop
Umut Ege Samancıoğlu, Ali Koşar, Erdal Çetkin
Izmir Institute of Technology Sabancı Üniversitesi
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
In this study, Y-shaped micromixers with mixing chamber design optimized as rotation and chaotic advection in the fluid domain increase with the chamber. Motivated by the advantages of Y-shaped mixers, a parametric study was performed for inlet angles (α, β), inlet channel eccentricities (x-ecc, z-ecc) and length scale ratios (L1/L2, D1/D2, and Vsp). z-eccentricity is introduced in addition to x-eccentricity to create a design that further enhances the swirl and chaotic advection inside mixing chamber for the first time. The results reveal that the maximum mixing efficiency can be achieved for Reynolds number of 81 and α, β, x-ecc, z-ecc, D1/D2, and L1/L2 values of 210°, 60°, 20 μm, 20 μm, 1.8, and 4, respectively. In addition, the proposed Y-shaped micromixer leads to a lower pressure drop (at least 50% reduction for all Reynolds numbers) in comparison to competing design. The maximum reduction in pressure drop is 72% less than the curved-straight-curved (CSC) (Re = 81) with mixing efficiency of 88% and pressure drop of 9244.4 Pa. Overall, an outstanding mixing efficiency was offered over a wide range of Reynolds numbers with distinctly low pressure drop and a compact micromixer design, which could be beneficial for a wide variety of applications where volume and pumping power are limited.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Microfluidic and Capillary Electrophoresis Applications
Heat Transfer and Optimization · Innovative Microfluidic and Catalytic Techniques Innovation
参考文献 36
此处列出前 3 条
引用本文 5
按被引量排序,此处列出前 3 条