A Field Validated Approach to Small Bore Tubing Vibration Induced Fatigue Modelling
Ian Cheong, Raj Singh
Vereniging Diervoederonderzoek Nederland
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Small bore tubing (SBT) assemblies are process containing lines that are critical for the safe and reliable operation of sensing and control instrumentation in the oil and gas industry. They are used extensively in industry including onshore and offshore plants in the oil and gas for the purpose of plant monitoring, control and safeguarding. However, SBT assemblies are prone to various failure modes. The failure of SBT assemblies would typically lead to a loss of containment (LOC) event, which in the absence of further controls, can ultimately lead to fire, explosions and/or fatality in oil and gas. One of the most common failure modes of SBT assemblies is Vibration Induced Fatigue (VIF) which is not well understood in industry. While there exists well-established guidance on the fatigue life of welded small bore piping components in the EI Guidelines, there is limited guidance for SBT connections. The key objective of this study was to develop and validate a modelling methodology that may be used in the development of an allowable vibration guideline to predict the risk of vibration induced fatigue failures of SBT connections. A finite element (FE) model was built based on the dimensions and geometry of a SBT as installed on a reciprocating compressor at an operating plant. Strain and vibration data was collected and used to calibrate the FE model. Close agreement was achieved between the FE model predicted results and measured data, which validated the accuracy of the modelling approach.
逐年被引趋势
暂无年度引用数据
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Structural Integrity and Reliability Analysis
Fatigue and fracture mechanics · Vibration and Dynamic Analysis