Potential of microperforated panel absorber
Dah-You Maa
Chinese Academy of Sciences Institute of Acoustics
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Many applications have been found for the microperforated panel (MPP) absorber, on which the perforations are reduced to submillimeter size so that they themselves will provide enough acoustic resistance and also sufficiently low acoustic mass reactance necessary for a wide-band sound absorber. The most important parameter of the MPP is found to be the perforate constant k which is proportional to the ratio of the perforation radius to the viscous boundary layer thickness inside the holes. This, together with the relative (to the characteristic acoustic impedance in air) acoustic resistance r and the frequency f0 of maximum absorption of the MPP absorber, decides the entire structure of the MPP absorber and its frequency characteristics. In other words, the MPP absorber may be designed according to the required absorbing characteristics in terms of the parameters k, r, and f0. Formulas and curves are presented toward this end. It is shown that the MPP absorber has tremendous potential for wide-band absorption up to 3 or 4 octaves and for low-frequency absorption with a cavity of depth small compared to the wavelength. Techniques of making minute holes (of 0.1–0.3 mm, say) have to be developed, though.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
物理Acoustic Wave Phenomena Research
Vibration Control and Rheological Fluids · Ultrasonics and Acoustic Wave Propagation
参考文献 10
此处列出前 3 条
引用本文 1,412
按被引量排序,此处列出前 3 条