Advanced Method for Voltage Breakdown Analysis of PEM Water Electrolysis Cells with Low Iridium Loadings
Mirjam Rogler, Michel Suermann, Richard August Wagner, Simon Thiele, Jochen Straub
Siemens Energy Helmholtz Institute Erlangen-Nürnberg
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Proton exchange membrane water electrolysis (PEMWE) is an established technology for hydrogen production. To meet the increasing demand and further reduce costs, there is a growing interest in reducing the iridium (Ir) loading. In recent works the complex interface between porous transport layer (PTL) and catalyst layer (CL) was identified as pivotal for PEMWE performance. In this study, this interface was systematically investigated for various Ir loadings and PTL types using a voltage breakdown analysis (VBA) method to differentiate between different sources for overpotential. As expected, the oxygen evolution reaction (OER) overpotential increases with decreasing Ir loading, but its extent depends on the CL/PTL interfacial contact area and the in-plane electrical conductivity of the CL. If the latter is low, this can be partly compensated by using a proper PTL counterpart. However, especially when using low Ir loadings, the VBA method results in inconclusive OER kinetic parameters such as the apparent exchange current density. Therefore, the constant Tafel slope voltage breakdown analysis (CT-VBA) method is proposed considering possible mass transport losses even at relatively small current densities within the Tafel fit regime. These findings provide insights to tackle challenges associated with reducing Ir loading.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Fuel Cells and Related Materials
Electrocatalysts for Energy Conversion · Hybrid Renewable Energy Systems