A Controllable Method for Electrochemical Deposition Formed Crystalline MoS2 As a Counter Electrode for Dye-Sensitized Solar Cells
Chao-Kuang Cheng, Che‐Hsien Lin, Tsung‐Kuang Yeh, Chuen‐Horng Tsai, Chien‐Kuo Hsieh
National Tsing Hua University Ming Chi University of Technology
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
In this study, the two-dimensional nanomaterials of molybdenum disulfide (MoS2) were synthesized onto the fluorine-doped tin oxide (FTO) glass substrate via the electrochemical deposition (ECD) method. By controlling the potential during the ECD processes, the MoS2 thin films were deposited homogenously onto a large area of FTO glass. It was observed that the edge planes of MoS2 provided plenty active sites for an efficient counter electrode (CE) of the dye-sensitized solar cells (DSSCs). The electrochemical properties of the controllable the MoS2 thin films were characterized and compared with the Platinum (Pt) films prepared by the e-gun technology. The electrochemical activity of the MoS2 CE was performed by cyclic voltammetry (CV), electrochemical impedance spectroscope (EIS) and also assembled as the Pt-free DSSCs. In combination with a dye-sensitized TiO2 working electrode and an iodine-based electrolyte, the DSSC with the MoS2 CE showed a photovoltaic conversion efficiency of 6.089 % under the illumination of AM 1.5 (100 mWcm-2). The results demonstrated that the ECD method displayed a facile and economical process to synthesize the low-cost MoS2 CE for the cost-effective DSSCs.
逐年被引趋势
暂无年度引用数据
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程TiO2 Photocatalysis and Solar Cells
Electrocatalysts for Energy Conversion · Advancements in Battery Materials