Design and optimization of novel composite bionic pinnate leaf and spider web microchannel heat exchanger
Jinlong Yang, Hyun-joo Kang, Chul-Hee Lee
Inha University
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
The heat dissipation structure was developed using a composite bionic design method. An adjoint solver optimized the shape of the heat dissipation structure to achieve a more uniform temperature and velocity distribution, addressing the heat dissipation challenges of high-performance electronic equipment. Additionally, 3D metal printing technology was employed for performance testing. This study primarily examined the effects of flow channel geometry (pressure drop), inlet flow rate, and working fluid type on the heat transfer efficiency and the uniformity of temperature and velocity distribution in microchannel heat exchangers. The pressure drop was reduced by 50.63% (from 0.079 MPa to 0.039 MPa), and the maximum temperature decreased by 7.2 K. As the inlet flow rate increased, the heat dissipation effect continued to improve. Regarding working fluid selection, the heat transfer efficiency of a calcium formate/water mixture surpassed that of ethylene glycol/water and propylene glycol/water mixtures; however, the latter two exhibit better temperature distribution uniformity. The final research findings offer an effective solution to the heat dissipation issues faced by high-performance equipment and present a novel approach to optimizing the design of microchannel heat exchangers, which holds significant reference value.
逐年被引趋势
暂无年度引用数据
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Heat Transfer and Optimization
Heat Transfer and Boiling Studies · Heat Transfer Mechanisms