Study on vibration fatigue of lifeguard in a metro bogie and methodology for damage estimation based on the measured acceleration
Zhenxian Zhang, Xingwen Wu, Yuhao Zheng, Yang Liu, Xuesong Jin, Jinming Zhou, Maoru Chi, Zefeng Wen
Southwest Jiaotong University Nuclear Power Institute of China
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
The lifeguard is more like a cantilever beam installed on the end of bogie frame, used to remove foreign body on the rail. Due to severe vibration condition, the lifeguard has been reported to be subjected to fatigue failure by railway operators. This paper thus studied on fatigue failure mechanisms of lifeguard through both the field test and numerical simulation. In the field test, the vibration acceleration and dynamic stress developed on the lifeguard were measured to identify main contributors to the fatigue failure. The test results showed that the structural resonance arising from the rail corrugation-induced high frequency impact serves as the main causal factor. To better understanding the failure mechanism, a numerical model considering the flexibility of lifeguard was established to determine the stress field of lifeguard based on the modal method, which was further used to estimate the residual fatigue lifetime for given loading conditions. The results showed that the obtained dynamic stress for given position on lifeguard is quite comparable with those obtained through the field test. Based on the obtained dynamic stress, the fatigue damage was further estimated and concluded that the fatigue lifetime of lifeguard is much less than the designed lifetime under the considered loading condition. The rail grinding and the structural improvement are thus suggested to mitigate the vibration fatigue of lifeguard.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Railway Engineering and Dynamics
Fatigue and fracture mechanics · Vibration and Dynamic Analysis