Effects of binder and thermal debinding parameters on residual carbon in injection moulding of Nd(Fe, Co)B powder
S. H. Lee, Joonghoon Choi, Won Yong Jeung, T. J. Moon
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Thermal debinding properties of several organic binders for the injection moulding of Nd(Fe,Co)B powder have been investigated. The investigation included analysis of the residual carbon content, which affects the magnetic properties of the sintered magnet. The effect of several debinding parameters such as specimen thickness, debinding atmosphere, gas flowrate, heating rate, and debinding temperature were also studied. Depending on the pyrolysis mechanism, binders gave specific results for the residual carbon. The molecular weight was found to have a large effect on the residual carbon and showed a logarithmic linear increase with increase in residual carbon. Hydrogen gas was found to be the most appropriate atmosphere for the debinding of the moulded specimens. Slow heating and high temperature were found to be effective for low residual carbon. Gas flowrate showed little effect and specimen thickness showed no effect, except with stearic acid.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
材料 / 化学Magnetic Properties of Alloys
Powder Metallurgy Techniques and Materials · Injection Molding Process and Properties