Mechanical properties of shale-gas reservoir rocks — Part 1: Static and dynamic elastic properties and anisotropy
Hiroki Sone, Mark D. Zoback
GFZ Helmholtz Centre for Geosciences Stanford University
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Understanding the controls on the elastic properties of reservoir rocks is crucial for exploration and successful production from hydrocarbon reservoirs. We studied the static and dynamic elastic properties of shale gas reservoir rocks from Barnett, Haynesville, Eagle Ford, and Fort St. John shales through laboratory experiments. The elastic properties of these rocks vary significantly between reservoirs (and within a reservoir) due to the wide variety of material composition and microstructures exhibited by these organic-rich shales. The static (Young’s modulus) and dynamic (P- and S-wave moduli) elastic parameters generally decrease monotonically with the clay plus kerogen content. The variation of the elastic moduli can be explained in terms of the Voigt and Reuss limits predicted by end-member components. However, the elastic properties of the shales are strongly anisotropic and the degree of anisotropy was found to correlate with the amount of clay and organic content as well as the shale fabric. We also found that the first-loading static modulus was, on average, approximately 20% lower than the unloading/reloading static modulus. Because the unloading/reloading static modulus compares quite well to the dynamic modulus in the rocks studied, comparing static and dynamic moduli can vary considerably depending on which static modulus is used.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
物理Seismic Imaging and Inversion Techniques
Hydrocarbon exploration and reservoir analysis · Hydraulic Fracturing and Reservoir Analysis