INSIGHT TO THE MICROSTRUCTURE CHARACTERIZATION OF A HP AUSTENITIC HEAT RESISTANT STEEL AFTER LONG-TERM SERVICE EXPOSURE
Mahyar Mohammadnezhad, Vahid Javaheri, Morteza SHAMANIAN, Shahram Rizaneh, Jerzy A. Szpunar
Isfahan University of Technology University of Oulu University of Saskatchewan
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Heat-resistant steels of HP series (Fe-25Cr-35Ni) are used in high temperature structural applications. Their composition include Nb as strong carbide former. Electron Backscatter Diffraction (EBSD) investigations revealed that, in the as-cast condition, alloys exhibit austenitic matrix with intergranular primary carbides such as MC, M23C6 and/or M7C3. During exposure at a high temperature, phase transformations occurred: chromium carbides of M7C3 type transform into the more stable M23C6 type, intergranular M23C6 carbides precipitate, and Lave phase due to increase of Niobium activity with temperature increase, as thermodynamic simulation confirmed. Therefore, combination of EBSD-EDS technique with thermodynamic calculation is one of the novel and most accurate method to investigation of phase transformation, as the precipitations are identified on the basis of their crystal structure, chemical composition and their thermodynamic features.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程High Temperature Alloys and Creep
Microstructure and Mechanical Properties of Steels · Metallurgical and Alloy Processes
参考文献 11
此处列出前 3 条
引用本文 6
按被引量排序,此处列出前 3 条