Collection Efficiency Evaluation of Baffle-Type Pre-Separator Configurations: Effects of Baffle Location and Inlet Velocities
Michael D. Buser, Derek P. Whitelock, Gregory A. Holt, Carlos B. Armijo, Lingjuan Wang-Li
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Some cotton gins across the Cotton Belt use an abatement system consisting of a baffle-type pre-separator followed by cyclones to control the emissions from the cotton gin's various exhausts. Very limited information exists in the literature which discusses the effects of baffle location and critical velocity on the pre-separator's collection efficiency. In this study, a range of critical air velocities and loading rates were evaluated to determine the effect of baffle location of the pre-separator's collection efficiency when using cotton gin waste. None of the treatments significantly affected the over-sized cyclone or over-all collection efficiency. The pre-separator collection efficiency was higher (81%) when the baffle placed at one-third the overall width of the pre-separator from the inlet than when placed at one-half (78%) or two-thirds (75%). The pre-separator collection efficiency was 79.4% at 18.3-m s-1 (3600-fpm) inlet velocity which was significantly higher than 78.2% at 20.3 m s-1 (4000 fpm) and 78.5% at 22.4 m s-1 (4400 fpm). Loading rate did significantly affect the pre-separator efficiency, but not to the extent of inlet velocity. The sieve analysis indicated that the pre-separator removed the majority of material larger than 180 m; however, the pre-separator did allow a substantial amount of lint to pass through to the cyclone. The baffle-type pre-separator performed well in reducing the course material loading rate entering the cyclone.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Cyclone Separators and Fluid Dynamics
Agricultural Engineering and Mechanization · Aerosol Filtration and Electrostatic Precipitation
参考文献 0
引用本文 2
按被引量排序,此处列出前 3 条