Surface energy modification for coating adhesion improvement on polypropylene
E. de S. Medeiros, Derce de Oliveira Souza Recouvreux, Hazim Ali Al-Qureshi, Ricardo Brandès
Universidade Federal de Santa Catarina
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Polypropylene (PP) has poor superficial properties making a pre-treatment before coating the paint film necessary. The pre-treatment related to surface improvement most widely used in the industry is the flame treatment due to its capacity to achieve the necessary level of surface energy. This work is to study the effect of the flame treatment in the adhesion increase for painting films applied on polypropylene substrates. Scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FTIR), dyne test inks, contact angle, resistance to adhesion by engraving and washing were employed to evaluate the flame treatment. The morphological, chemical and physical analysis presented superficial modification, the formation of new functional groups and improvements on adhesion between substrates and paint film, respectively. These results proved the efficacy of the flame treatment in the increase of the surface energy and in the adherence of the coatings applied to the PP substrates.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
材料 / 化学Polymer Science and Applications
Surface Treatment and Coatings · Polymer Surface Interaction Studies