Effect of molding history on molecular orientation relaxation during physical aging of polystyrene injection moldings

This work examined the effect of changing molding conditions on the physical aging of polystyrene injection moldings. First, we investigated the relationship between the molecular orientation and the molding conditions. The molecular orientation near the surface changed with changing injection rate, so we hypothesized that this molecular orientation might form during the filling stage. Because this molecular orientation did not relax under heat treatment below the glass transition temperature ( T g ), the oriented molecules near the surface were thought to be elongated owing to the high strain rate during the filling stage. On the other hand, the molecular orientation in the core layer changed with changing holding pressure and relaxed under heat treatment below T g . Thus, the molecules in the core layer might become oriented during the holding stage and not be elongated owing to the slow strain rate. Furthermore, the molecular orientation in the core layer decreased with increasing mold temperature, and the physical heat resistance improved with increasing mold temperature. Meanwhile, the excess enthalpy did not change with changing molding conditions. Therefore, the improvement in physical heat resistance with increasing mold temperature was likely caused by the decrease in the molecular orientation in the core layer. Analyzing the relaxation behavior of the molecular orientation suggested that increasing mold temperature reduced the number of oriented molecules with large deformation in the core layer.